Products |
| Cardio-Vascular Group >
Cardiac Assist > Intra Aortic Balloon Catheters |
Intra-Aortic Balloon
Catheters
|
 |
|
|
 |
Arrow FiberOptix™ 7.5Fr & 8.0Fr IABC |
| |
The first and only Fiber Optic series of IntraAortic Balloon Catheters.
Consistently captures the AP signal
- FiberOptix technology reliably captures consistent AP information from aorta to pump. Unlike conventional fluid-filled system, the FiberOptix sensor is unaffected by routine conditions such as dampening, flushing, blood draws noise, and transducer movement. So you can be confident in the AP signal the catheter captures.
Transmits better information Faster
- With FiberOptix, you can depend on faster transmission of the AP signal through the catheter. The unique FiberOtpix sensor in the tip of the catheter uses reflected light traveling at 186,000 miles per second to measure changes in AP. The result: better AP information communicated faster than conventional fluid-filled catheters.
Resists Kinking
- The FiberOptix 7.5Fr Flex wire-reinforced catheter delivers easy and reliable intra-aortic balloon (IAB) performance. It features a better kink-resistant body and large gas lumen for optimal, consistent gas flow between balloon and pump. The small 7.5Fr catheter body also maximizes arterial flow around the catheter, reducing the risk of limb ischaemia.
Reliable Support – even during Arrhythmia’s
- FiberOptix supports the clinical needs of intra-aortic balloon pump (IABP) patients when used in combination with Arrow’s AutoCAT 2 WAVE® pump console. Both FiberOtpix 7.5Fr and 8Fr catheters utilise speed-of-light signal acquisition and transmission facilitating accurate balloon timing – even in patients with severe arrhythmias.
Reliable Speed of Light response
- Speed-of-light AP signal acquisition overcomes the delays of fluid-filled systems to set timing accurately during arrhythmias
- AP Signal converted to aortic flow calculates the future AV closure with 98% accuracy during severe arrhythmias.
- FiberOptix AP signal is unaffected by dampening, noise, and movement – and will not degrade over time.
• Built-In Performance Features
- Optional wire-reinforced catheter: Choose either the original FiberOptix 8 or the FiberOptix 7.5Fr Flex with wire-reinforced, kind-resistant catheter body
- Abrasion-resistant balloon membrane: Our Cardiothane™ balloon offers a unique design of abrasion-resistant material with hydrophilic coating
- Universal design: Sheathed or sheathless insertion options and optional haemostasis device for post-insertion bleeding control are available
- Flexible Fit: Fits through 8Fr sheaths (available in 30cc or 40cc sizes)
- Easy and reliable: Eliminates many routine user-intervention and signal problems:
• No maintenance of fiberoptic signal
• No electrical interference from diathermy
• No transducer-induced motion artifact
• No re-zeroing of transducers.
- The accurate, real-time advantages of the FiberOtpix catheters are available only when the catheter is used with the AutoCAT 2 WAVE pump console. However, FiberOptix can be used as a conventional catheter with any IABP ensuring continuity and ease in cases of patient transfer.
|
| Part No. |
Brief Description
|
Case Q'ty |
IAB-06830LWS
|
FiberOptix™ Flex IABC 7.5Fr 30cc
|
1 |
IAB-06840LWS
|
FiberOptix™ Flex IABC 7.5Fr 40cc
|
1 |
IAB-06850LWS
|
FiberOptix™ Flex IABC 7.5Fr 50cc
|
1 |
| IAB-05830LWS |
FiberOptix™ 8 IABC 8.0Fr 30cc |
1 |
| IAB-05840LWS |
FiberOptix™ 8 IABC 8.0Fr 40cc |
1 |
|
| |
FiberOptix™ Intra-Aortic Balloon Catheters |
»
View product brochure in PDF format 
|
| |
 Top |
|
Arrow UltraFlex™ 7.5Fr IABC |
| |
The smallest wire-reinforced IntraAortic Balloon catheter available.
Wire-reinforced and small 7.5Fr size delivers easy and reliable IAB performance and kink-resistance when you need it most.
| Part No. |
Brief Description
|
Case Q'ty |
IAB-06830U
|
UltraFlex™ IABC 7.5Fr 30cc
|
1 |
IAB-06840U
|
UltraFlex™ IABC 7.5Fr 40cc
|
1 |
IAB-06850U
|
UltraFlex™ IABC 7.5Fr 50cc
|
1 |
|
| |
UltraFlex™ Intra-Aortic Balloon Catheters |
»
View product brochure in PDF format
|
| |
Top |
|
Arrow Ultra8® 8.0Fr IABC |
| |
Finally! An 8Fr IABC that fits through any 8Fr sheath and offers high performance without frequent flushing.
Provides crisp, clear arterial waveforms
Large Central Lumen
- Minimises the risk of central lumen clotting
- Maximises the quality of arterial pressure waveforms
- Minimises maintenance and manipulation of the central lumen
Frequent flushing is no longer needed
Optimal Performance
- A larger gas lumen enables faster inflate/deflate speeds for improved patient support.
- Sheathed or sheathless insertion
- Optional Haemostasis device to control bleeding at the insertion site
- Smooth transition from 8Fr balloon membrane to 8Fr Catheter shaft
|
| Part No. |
Brief Description
|
Case Q'ty |
IAB-05830U
|
Ultra8® IABC 8.0Fr 30cc
|
1 |
IAB-05840U
|
Ultra8® IABC 8.0Fr 40cc
|
1 |
|
| |
Top |
|
Arrow Rediguard® 7.0Fr IABC |
| |
| Part No. |
Brief Description
|
Case Q'ty |
IABS730C
|
7Fr 30cc Rediguard® IAB Catheter Kit - Universal
|
1 |
|
| |
| IABS730C |
30cc 7.0 Fr RediGuard® Flexible
IAB Catheter |
1/case |
| One: |
Torque Tube Catheter:
8 Fr. 2-Lumen, 83 cm |
| One: |
Syringe: 60 cc Luer-Slip |
| One: |
Tubing: 36" Pressure
Monitoring |
| One: |
Valve: One Way |
| One: |
Valve: Three Way |
| Two: |
Spring Wire Guide:
.025" (.64 mm) dia. x 59" (150 cm) 3mm "J"
Tip |
| One: |
Introducer Needle:
18 Ga. x 2-3/4 +/- .06" (N/A cm) TW |
| One: |
Scalpel: #11 |
| One: |
Dilator: Introducer |
|
| |
Top |
| |
|
